3M Resin In-line Splice Kits

  • $80.81
    Unit price per 


Scotchcast Resin Splicing Kits

While crimpits and split bolts mechanically splice buried wires on cathodic protection systems, a connection is not complete until it is sealed against moisture and corrosive chemicals. Scotchcast splicing kits provide this protection. They are packaged with all the materials necessary for encapsulating wire connections to provide total electrical insulation. The main component of the Scotchcast kit is a two-part epoxy resin. Because the resin is packaged in a specially designed mixing pouch, field installations are greatly simplified. The packaging ensures proper mixing ratios and makes clean-up unnecessary. Each kit is also provided with molded plastic forms and 3M electrical insulating tape to surround the wire splice. Once the resin is properly mixed, it is simply poured into the plastic form. The resin cures in approximately 30 minutes to provide a moisture-tight seal and electrically insulated splice.

Scotchcast kits are available for a wide range of wire configurations. When odd-sized or odd-shaped splices must be protected, multi-mold kits should be used. These kits are designed to handle almost any type of splice configuration. Each kit is provided with the same components as regular 3M Scotchcast kits with the exception of the molded plastic forms. Multi-mold kits are supplied with wrap-around molds made of polyester film and porous webbing.

Typical Applications

The Scotchcast splicing kits are the proven way to protect wire splices from moisture and corrosion. They are ideal for impressed current cathodic protection systems which use anode header cables. The Scotchcast resin contained in the kits is rated up to 1000 volts. The resin cures in 30 minutes at temperature of 60°F and above.

82-A1

Scotchcast™ 82-A1 In-Line Resin Splicing Kit for Cable O.D. 0.625"

82A Series, Voltage Rating up to 5 kV non-shielded, UL 486D listed, File #EI 02356

Use the 82A series kits to insulate and moisture-seal single conductor, non-shielded cables through 5 kV and multi-conductor cables through 1000 V. Each kit contains a snap-together mold body which fits around the splice, two funnels, tape for sealing mold ends and Scotchcast 4 epoxy electrical insulating resin in a Unipack™ container for clean and easy handling.

These kits may be used for above ground or direct burial applications.

Specifications:

  • Max. Voltage Rating: 5 kV
  • Conductor Size: 2 AWG 30 mm
  • Max. Connector Crimped: 0.625” 16 mm
  • Max. Conn OD: Sleeve Type: 0.406” 10 mm
  • UPC: 25024
 82-A2

Scotchcast™ 82-A2 In-Line Resin Splicing Kit for Cable O.D. 1.0"

82A Series, Voltage Rating up to 5 kV non-shielded, UL 486D listed, File #EI 02356

Use the 82A series kits to insulate and moisture-seal single conductor, non-shielded cables through 5 kV and multi-conductor cables through 1000 V. Each kit contains a snap-together mold body which fits around the splice, two funnels, tape for sealing mold ends and Scotchcast 4 epoxy electrical insulating resin in a Unipack™ container for clean and easy handling.

These kits may be used for above ground or direct burial applications.

Specifications:

  • Max. Voltage Rating: 5 kV
  • Conductor Size: 2 3/0 AWG 35 to 80 mm
  • Max. Connector Crimped: 1.0” 25 mm
  • Max. Conn OD: Sleeve Type: 0.625” 16 mm
  • UPC: 25032
82-A3

Scotchcast™ 82-A3 In-Line Resin Splicing Kit for Cable O.D. 1.563"

82A Series, Voltage Rating up to 5 kV non-shielded, UL 486D listed, File #EI 02356

Use the 82A series kits to insulate and moisture-seal single conductor, non-shielded cables through 5 kV and multi-conductor cables through 1000 V. Each kit contains a snap-together mold body which fits around the splice, two funnels, tape for sealing mold ends and Scotchcast 4 epoxy electrical insulating resin in a Unipack™ container for clean and easy handling.

These kits may be used for above ground or direct burial applications.

Specifications:

  • Max. Voltage Rating: 5 kV
  • Conductor Size: 3/0 AWG 90 to 200 mm 400 KCMIL
  • Max. Connector Crimped: 1.563” 40 mm
  • Max. Conn OD: Sleeve Type: 1.0” 25 mm
  • UPC: 25040

We Also Recommend